Stihl BF Manual De Instrucciones página 13

If the plug comes out of the drive tube
when you pull off the cap:
Push the plug into the drive tube as
N
far as stop.
Removing the gearbox or attachment
Remove any existing gearbox or
interchangeable attachment from the
basic power tool.
FCS
FCS
BF
FH/HL
N
FS
N
If the drive shaft slips out of the tube
when you pull off the gearbox:
N
FS
The drive shaft must not project from the
tube more than L = 22 mm (7/8 in).
If dimension (L) is not correct:
N
HT
KB/KW
Loosen the clamp screws (arrows)
on the gearbox housing – do not
remove them.
Pull the gearbox off the drive tube.
Push the drive shaft into the tube.
L
Apply slight pressure to the drive
shaft and rotate it slowly at the same
time until it can be pushed in to the
specified length.
English
11