Publicidad
Idiomas disponibles
Idiomas disponibles
5
2X
P
2X
6
7
T
R
S
#2
8
12-05-12 65253 Rev. 2
K
Driver's Side Shown
#2
Passenger Side Shown
Plastic
Sleeve
2X
2X
K
2X
Knuckle Assembly
Completely Covered
5 of 8
Locate the left and right
Tailgate Mounts. Orient
them on the vehicle.
Hook the bottom of one
mount under the belt
rail and roll it toward
the inside of the vehicle
until it clips into place.
Repeat this with the
other Tailgate Mount.
Rotate Side Bow 90
degrees until vertical.
Insert screw into
existing hole and
tighten using Phillips
screw driver.
Slide plastic sleeve over
knuckle assembly.
Locate the Center Bow
Assembly. Align hole to
the Side Bow Assembly
and secure.
Use an M5 x 30 Machine
Screw with two (2)
Bushings and an M5
Nylock Nut.
K6861727
Publicidad
