Parking Holder For Taking Breaks Or Storage; Cleaning; Changing / Cleaning The Dust Bag - Silvercrest SBSB 750 A1 Instrucciones De Utilización Y De Seguridad

Parking holder for taking
breaks or storage
During short work breaks you can park the tel-
escopic wand on the vacuum cleaner
4
using the floor brush
suction attachment into the parking holder
using the parking cam (see Fig. E I).
After use, position the vacuum cleaner
right. Then insert the suction attachment (floor
brush ) downwards into the parking holder
8
using the park cam (see Fig. E II). It is helpful
to slide the sections within the telescopic wand
completely into one another. This allows
4
you to easily carry the product or to park it for
storage.

Cleaning

ELECTRIC SHOCK! Always switch
off the product before cleaning or
maintaining it and unplug the mains
plug from the mains socket.
ELECTRIC SHOCK! Never immerse
the product in water.
ELECTRIC SHOCK! Do not allow
water to enter the housing.
Do not use aggressive cleaning
agents, brushes with metal or ny-
lon bristles, or sharp and metal
cleaning objects such as knifes,
hard spatulas or similar. Doing so
may result in property damage.
36 GB/MT
1
. To do so, insert the
8
up-
1
DANGER OF
DANGER OF
DANGER OF
Never put the product in the
dishwasher. This would break
the product.
Changing / cleaning
the dust bag
Note: The dust bag must be changed as soon as
the control light lights up red.
15
Note: The control light
the suction nozzle, the telescopic wand
hose are clogged. If this happens, switch off the
2
product and remove the foreign objects.
Using the supplied cloth bag:
Press the release handle
the dust bag compartment (see Fig. F).
Remove the cloth bag
plastic part of the cloth bag
bag holder (see Fig. G).
20
Empty the cloth bag
If necessary, clean the cloth bag
and a neutral washing detergent.
If you have washed the cloth bag
that it is completely dry before inserting it back
into the product. When inserting it, ensure that
the cloth bag does not become clamped.
6
Slide the rigid plastic part of the textile bag
into the dust bag holder
Close the lid of the dust bag compartment until
it clicks into place audibly.
Using other paper bags you have
purchased:
Press the release handle
the dust bag compartment (see Fig. F).
Remove the paper bag by pulling the rigid
holder on the paper bag out of the dust bag
holder (see Fig. G).
20
Dispose of the paper bag.
Slide the rigid holder of a new paper bag into
the dust bag holder
sure that the paper bag does not become
clamped.
will also light up red if
15
or the
4
to open the lid of
19
by pulling the rigid
6
out of the dust
6
.
6
with water
6
, ensure
6
.
20
to open the lid of
19
. When inserting it, en-
20
6