Publicidad
Idiomas disponibles
Idiomas disponibles
How to adapt a photographic, or a video camera. (Only for B3-223 model)
Model B3-223 comes equipped with a vertical port on the top of the head that permits the attachment of a
photographic, or reflex type camera through use of the corresponding adapters.
The two position sliding rod allows the microscope image to appear easily through this third path.
•
When the rod is pushed completely into the head, 100% of the image is directed to the binocular
eyepiece for observation.
•
In the extended position, 30% is directed to the binocular eyepiece, and 70% to the vertical port.
A.
To adapt a photographic camera, an adapter tube is required
(Fig. 5). This tube includes a 2,5X lens for photography which
measures the parfocality correctly between the images of the
binocular and vertical ports. The adapter tube also requires a
T mount adapted to fit the T threads of all photographic
camera brands on the market.
1. To install the camera on the microscope, first extract the
removable lens on the camera, and place the appropriate
T thread. Then attach the adapter tube to the thread.
2. Loosen the knurled screw located on the side of the
vertical port until the protective cap can be removed.
(Fig.6).
3. Insert the adapter tube with the camera
already connected to the vertical port. If it
does not fit easily, unscrew the knurled
screw until the adapter tube fits in and is
firmly in place.
4. Tighten the knurled screw to secure the
camera well.
5. Place the sliding rod to mid or extended
position so that the image can be
projected to the photographic camera.
6. Operate
manufacturers instructions.
b. If air bubbles appear, they can be removed by moving the revolving nosepiece (3)
slightly back and forth.
c. After using the microscope, all parts that have come into contact with immersion
oil must be cleaned. Using a soft cotton cloth lightly dampened with Xylene. If the
100X objective is not cleaned, oil could dry on the lens surface resulting in the
view being blocked, and possible damage occurring. This must be repeated each
time the microscope is used.
NB: Immersion oil must ONLY be used with the 100X objective, which is the
only objective prepared for it. If any other objective comes into contact with
immersion oil, it must be cleaned immediately.
the
camera
according
Adapter tube
Knurled
screw
Light
controlling
to
rod
-8-
Photo adapter
Video adapter
Fig. 5
Fig. 6
Publicidad
