G
ETTING STARTED
Connect and charge wrist shaker
Important: Use only the power adapter supplied, otherwise wrist shaker
may not work.
1. Plug in the charger unit
Plug the charger unit into the wall socket.
2. Place the wrist shaker in the
charger unit
Place wrist shaker on its charger unit, with
the two connection points facing down. A red light on the wrist shaker indicates
it is charging properly. Charge the wrist shaker for 10 hours before use.
Note: When fully charged, the wrist shaker's battery will last fi ve days. The
larger red light will fl ash slowly when the battery is low and needs to charge
for 10 hours.
3. Switch wrist shaker on/off
Press and hold
triangle comes on.
10
for fi ve seconds, until the green light with the warning
Service Center