Amplicom PowerTel 680 Guia Del Usuario página 9

Important: Use only Power supply model S008CU1200067 supplied by Ten
Pao Industrial Co., Ltd. for Base unit.
2. Connect cordless phone charger base
Plug the other power adapter that is already attached to charger base into the
wall socket and switch the power on.
3. Install battery pack
Insert the rechargeable battery pack into the handset and plug it in as shown.
Dispose of battery pack properly. Do not allow battery pack to come into
contact with fi re or water.
4. Charge handset
Place the handset on its base to charge for a minimum of 15 hours before use.
Important: Only use the rechargeable battery pack model GPHCH73N07, 750mAh
NiMH supplied by GPI INTERNATIONAL LIMITED.
5. Connect telephone cable
After initial charge, plug the telephone cable into the telephone wall socket.
1-866-AMPLICOM (267-5426)
G
ETTING STARTED
Caution: Risk of explosion
if battery is replaced by an
incorrect type. Dispose of
used batteries according
to the instructions.
9