Pausing The Appliance - domoova DRV20 Manual De Instrucciones

EN
Operating the appliance
Back to home base mode
If you wish to charge the robot at any time during operation, you can
do so by pressing the "Home Base" button on the remote control.
The robot will automatically go back to home base after searching
(search time depends on the distance between the home base and
if there are any objects along its route).
NOTES:
• When the robot performs a cleaning cycle, its ON/OFF light flashes blue.
• To switch from one cleaning mode to another, you have to put the robot on
pause, and then select the desired cleaning mode.

Pausing the appliance

To pause the robot, press the ON/OFF button on the robot or AUTO
on the remote control.
NOTE: After a few minutes, the robot's ON/OFF light goes off. For the robot to
resume its cycle press the ON/OFF or AUTO button twice.
16