Sensors And Ventilation - domoova DRV20 Manual De Instrucciones

EN
Maintenance
Then unclip the HEPA filter prefilter using its notches and clean with
clear water. Let it completely dry before putting it back on the HEPA
filter.
The HEPA filter can only be cleaned, otherwise it would become
damaged. To extend the filter's life, gently shake it outside to remove
any small dust particles that could accumulate. If the HEPA filter is
damaged, you are recommended to replace it to ensure that your
robot's filter performance is maintained.
NOTE: Accessories need to be replaced in accordance with how frequently the robot
is used and the amount and type of debris that it picks up. Replace them when they
are damaged or no longer have their original shape.

Sensors and ventilation

Gap and obstacle sensors
To ensure the correct operation of the appliance, you must clean the
robot's gap and obstacle sensors regularly. Clean them with a soft,
dry cloth. Never let the gap and obstacle sensors get wet.
Power sensors
The power sensors on the bottom of the robot and on the home base
must be regularly cleaned with a soft cloth. Never let the sensors get
wet.
Ventilation
To maintain optimum operation of the appliance, it is advisable to
regularly check the ventilation located at the back of the robot. Using
the cleaning tool provided or a soft cloth, remove dust particles that
can obstruct the ventilation.
19