domoova DRV20 Manual De Instrucciones página 26

EN
Troubleshooting
The robot
constantly
goes back to
its charging
6 base or
changes
direction for
no apparent
reason
The robot will
7 not go back to
its home base
The robot
will not start
its cleaning
8
cycle at the
scheduled
time
The infrared sensors are
dirty.
1. The home base is
not switched on.
2. The robot's infrared
sensors are dirty.
3. The room where
the robot is located
has too many
obstacles.
1. The robot is not
positioned on its
home base.
2. The appliance's
battery is not fully
charged.
24
Clean the front and rear
infrared sensors with a soft, dry
cloth.
1. Check that the home base
is connected to a socket
using the power cable.
2. Check and clean the
appliance's front and rear
sensors.
3. Remove any obstacles on
the ground in the room
to help the robot move
around better.
1. Put the appliance on its
home base.
2. Check the status of the
robot's battery.