Troubleshooting; Table: Malfunctions And Possible Causes - domoova DRV20 Manual De Instrucciones

EN

Troubleshooting

Please contact DOMOOVA technical department in the following
cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.

Table: Malfunctions and possible causes

To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
No Malfunction
The robot
1 does not
switch on
The robot
does not
2 respond when
using the
remote control
Cause
1. The appliance is not
switched on.
2. The appliance has
run out of battery.
1. The remote control
is too far away from
the robot.
2. The remote control
is not pointing at
the robot correctly.
3. The batteries
are not inserted
or need to be
replaced.
4. The robot has run
out of battery.
22
Solution
1. Press the ON/OFF button.
2. Charge the robot using its
home base.
1. Move the robot's remote
control nearer and make
sure there are no obstacles
between it and the appli-
ance.
2. Point the remote control in
the direction of the robot's
front or rear infrared
sensor.
3. Change the batteries.
4. Charge the robot using its
home base.