DeVilbiss Compact SB-2-542-A Manual De Operación página 8

Page 8 SB-2-542-A
TROUBLESHOOTING (continued)
CONDITION
Thick, dimpled finish "orange
peel".
AVAILABLE OUTFITS
COM-PS510G-18-01 ............Siphon Feed Gun with TGC-545 1qt Siphon Cup
COM-PS510G-22-01 ............Siphon Feed Gun with TGC-545 1qt Siphon Cup
COM-PS522G-14-04 ............Pressure Assist Outfit with 1qt Aluminum Cup with KK-4980 Regulator and
98-3143.................................80-600 SG2 Plus Outfit with Trans-Tech Compact Gun
98-3146.................................83-220 2-Gal Tank Outfit with Trans-Tech Compact Gun
98-3152.................................1/2" Diaphragm Pump Outfit with Trans-Tech Compact Gun
98-3155.................................80-295 Aluminum 2 QT Cup Outfit with Trans-Tech Compact Gun
CAUSE
Gun too close to surface.
Too much material coarsely atomized.
Air pressure too low.
Improper thinner being used.
Material not properly mixed.
Surface rough, oily, dirty.
Trans-Tech Compact Gun
CORRECTION
Check distance. Normally approx. 8".
Increase air pressure or decrease fluid pressure.
Increase air pressure or reduce fluid pressure.
Follow paint manufacturer's mixing instructions.
Follow paint manufacturer's mixing instructions.
Properly clean and prepare.