General Characteristics; Technical Features And Voltage; Conditions Of Use - TecniWork PODOSCOPIO AP500 Manual Del Usuario

PROTECTION AGAINST INDIRECT CONTACTS:
DEVICE OF CLASS II
FOLLOW THE INSTRUCTIONS FOR USE
1.2 DESCRIPTION AND GENERAL CHARACTERISTICS
The particular system of light diffusion of the PODOSCOPE AP500 enables you to study the patient's foot plant and
to mark the parts with the heaviest pressure.
Its structure is very simple: the methacrylate structure is an excellent light conductor and it is also endowed with
an inner light source: in this way you can discover variations of colour intensity on the foot plant, corresponding to
higher or lower plant pressure.
The base is of ABS.
A separable net cable with plug, a jack, and a led strip are its electric components.
MATERIAL
TENSION
FREQUENCY
POWER
ILLUMINATION
WAVELENGHT
RISK CLASS EN 62471
NR. OF INCLUDED PLUGS
2 FUSES
CONDITIONS OF USE
temperature: from 10°C up to +40°C
umidity: from da 20% up to 85%
TECNIWORK S.p.A. - PODOSCOPE AP500
PodoManISTRUZ_A4_x.indd 15
1.3 TECHNICAL FEATURES AND VOLTAGE
DEVICE WITH APPLIED
PART TYPE B
ATTENTION: DANGER
Transparent methacrylate
220-240 V single-phase
50/60 Hz
7,5 VA
Led Strip Light
520 nm
Exempt
Nr. 1
5 x 20 mm: 2 x T 0,5 A - 250 V
STOCKING CONDITIONS
temperature: from 0°C up to 60°C
umidity: from da 10% up to 90%
- 15 -
GB
doc.cod.IS-05-2 Ed.23/11/16
05/01/17 13:10