Electrical Schema; General Safety Warning; Chapter 2 - Installation; Transport And Stocking - TecniWork PODOSCOPIO AP500 Manual Del Usuario

ELECTRIC SCHEMA
Net cable with plug Net cable with plug Net cable with plug Net cable with plug Net cable with plug Net cable with plug
220-240 V 50/60 Hz 220-240 V 50/60 Hz 220-240 V 50/60 Hz
with jack and with jack and
fuseholder fuseholder
As far as safety is concerned, this podoscope has undergone all the necessary checks and inspections as foreseen.
In order to respect the safety prerequisites during the whole life of your device, we suggest that you always take the
following precautions:
A) Always unplug the podoscope during maintenance operations
B) Do not move the podoscope while using it
C) Each time before the usage, check the functioning of the cable and of its electric parts.
D) Operators must not intervene or take any initiatives on the podoscope which are not foreseen in this handbook.
ATTENTION: DO NOT CHARGE THE PODOSCOPE WITH LOADS OVER 135 KG (297 LB)
IN ORDER TO AVOID ANY RISK OF BREAKING
ATTENTION: NO CHANGE OF THE DEVICE IS ALLOWED.
ATTENTION: NOT COMPLYING WITH WARNINGS WILL RELIEVE TECNIWORK COMPANY
FROM ANY KIND OF RESPONSIBILITY
Before shipping the podoscope AP500 is covered by a fi lm and packed in a cardboard with protective panels inside.
The box contains the assembled podoscope and its cable (which must be obviously connected to the apparatus
before using it); the caoutchouc ref. AP504 is not included.
In case of a longer storage, please store the whole package clean and dry.
TECNIWORK S.p.A. - PODOSCOPE AP500
PodoManISTRUZ_A4_x.indd 18
Power Supply
AC/DC AC/DC AC/DC
O/I switch O/I switch O/I switch
Internal connectors Internal connectors Internal connectors Internal connectors
1.7 GENERAL SAFETY WARNING

Chapter 2 - INSTALLATION

2.1 TRASPORT AND STOCKING
Podoscope
- 18 - - 18 -
LED strip LED strip LED strip LED strip
doc.cod.IS-05-2 Ed.23/11/16
05/01/17 13:10