Pvp™ X3 Led Module Installation With Mt-01 - Chauvet Professional PVP X3 Manual De Usuario

PVP™ Module Care and Replacement
PVP™ X3 LED Module
installation with MT-01
22
1. Orient the product on a flat table as shown.
2. Unlatch and open Service Access Door
3. Place the new PVP™ X3 module on a flat surface.
4. With the MT-01 set to its home position, gently place the MT-01 on top of the new
module.
5. Turn the knob counter-clockwise until the magnets are 1 mm away from the surface.
6. Orient the module so the arrow on the back is pointed up.
Service Access Latches
PVP™ X3 User Manual, Rev. 1