Removing The Ups From The Pallet - Siel SAFEPOWER-EVO-HF Manual De Instalacion Y Uso

R UPS
EMOVING THE
CAUTION! TO AVOID HARMING PEOPLE AND/OR DAMAGING THE EQUIPMENT, FOLLOW
CAREFULLY THE FOLLOWING INSTRUCTIONS.
SOME OF THESE INSTRUCTIONS NEED TO BE CARRIED OUT BY TWO PEOPLE.
Cut the straps and remove the cardboard box by
sliding it upwards. Remove the packaging material.
Remove the accessory box.
NOTE: the accessory box can be either inside the
packaging, or behind the USP door.
The previously removed brackets can also be used as slides. Secure the slides to the pallet by using the type A screws,
making sure they are aligned with the wheels.
Screw the brake rod completely, so to separate it from the pallet
Make sure that the door is firmly closed.
CAUTION! Push the UPS from the rear with great care. Given the weight of the equipment, this operation needs to
be carried out by two people.
NOTE : It is recommended to keep all parts of the packaging for further use
IV331 Rev.000 SIEL S.p.A.
Data di emissione: 2011-08-22
FROM THE PALLET
Remove the 2 brackets securing the UPS to the pallet by
unscrewing the screws marked A and B in the figure.
Pag. 67 di 258 + FR