TEC29 EV
Control elements in the remote control
The remote control is installed in the vehicle interior.
No. in
fig. 4,
Description
page 4
1
Display
On/Off switch P
2
3
START button
4
Petrol gauge
5
Oil gauge
Displays
No. in
fig. 4,
Description
page 4
6
AC supply
7
Constant output
8
Operating hours
9
DC voltage
10
Messages
EN
Shows the status reports.
Switches the remote control on and off if the
main switch is at "I" or "1".
Stops the generator.
Starts the generator if the remote control is
switched on and the main switch is at "I" or
"1".
Lights up if the petrol goes into reserve.
Lights up if the oil level is too low in the
engine.
Actual voltage output
Current capacity of connected consumer
Time the generator is in operation
Battery voltage
Status reports of the generator (see chapter
"Display messages" on page 20)
Technical description
17