Holmatro GBP10EVO3 Manual Del Usuario página 45

Ocultar thumbs Ver también para GBP10EVO3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 90
8.5.3
Battery charger
Check the battery charger for damage and function.
If the battery charger is damaged or does not function correctly, have the Holmatro dealer repair or
replace it.
8.5.4
Battery
Check the battery for damage and function.
If the battery is damaged or does not function correctly, have the Holmatro dealer repair or replace
it.
If the battery is stored without being connected to the charger, it slowly discharges. Regularly
charge the battery to avoid complete discharge
8.6
Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
8.7
Packaging
In many regulations such as IATA (air), ADR (road) and IMO (sea), Li-Ion battery packs are considered
as dangerous goods. Please make sure that the goods are packed and transported in accordance with
the latest regulations. Consult your Holmatro dealer for detailed instructions.
8.8
Storage
8.8.1
Temporary storage
Store the pump in a dry and well-ventilated dust-free area.
Fasten the pump so it cannot fall over to prevent oil leaking.
Check whether the motor switch is in position OFF.
8.8.2
Long-term storage
For long-term storage, carry out the same actions as for temporary storage, as well as the following
additional actions:
Remove the battery pack from the tool.
Always store the battery packs in a dry and cool area. Temperatures above 45 °C (113 °F) can have
a negative affect on the life cycle of the battery packs.
WARNING
Avoid short-circuiting the battery pack. Make sure the connections do not come in contact
with metal objects or water. Never try to open a battery pack.
CAUTION
If not removed from the tool, a fully charged battery pack will discharge in 3 months.
Connect the battery pack to the charger with the on-tool charge cable to prevent discharge.
CAUTION
If the battery pack is removed from the tool and is not being recharged, it will slowly loose its
energy. Make sure that the battery pack is recharged at least once every year.
GBP10EVO3
916.400.220_001
EN
45

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido