5.7 - ALARM SETTINGS
Allows you to select your preferred alarm mode.
1
2
Sound alarm
Sound alarm
and vibration
Vibration only (the alarm will
not sound on Parent Unit but
it will on Nursery Unit).
IMPORTANT
When in MENU or SUB-MENU mode NO
sound, alarm or vibration will be emitted
from either the Parent Unit or the Nursery
Unit even if they were activated before
pressing the MENU or SUB-MENU mode.
5.8 - HOLD
Allows you to put your Angelcare monitor on HOLD.
1
2
IMPORTANT
When your monitor is on HOLD, the movement-detection feature and movement alarm
are disabled.
IMPORTANT
When your monitor is in HOLD mode, the movement alarm will not go off and the sound
will not be transmitted. When your monitor is in Sound only mode, the HOLD function
cannot be activated.
1) Press MENU button 5 times.
The Nursery Unit Indicator
will blinks.
2) Using the arrows, select
the desire notification option.
NOTE:
Vibration mode not available in some countries.
Sound alarm will replace vibration
mode when the Parent Unit is
in its Charging Cradle.
IMPORTANT
Vibration option will work when the
following alarm functions are activated:
• Out-of-range
• Temperature alert
• No movement detection
for 20 seconds.
1) Press and hold the Down Volume
arrow for 2 seconds.
The Hold Icon will appear on the
screen. The Parent Unit will emit a
double beep every minute to remind
you that your monitor is on HOLD.
2) To deactivate this function, press
and hold the Down Volume
arrow for 2 seconds.
E
N
21