Preparation For First Use - Holmatro EHW 1650 RC Manual De Instrucciones

EN
Item
General
Noise level
Vibration level
Temperature range (°C)
Directives
Country of manufacture
3.5 Accessories
/i
Description
Service set
Pressure reduce valve
• Valve
• Connection block
• Reducing nipple
• Stop plug
Manometer 2
• Pressure gauge
• Pressure gauge protective cover
• Adaptor
• Connection block
• Reducing nipple
Hydraulic oil
• ISO-L HV VG 15, 1 litre
• ISO-L HV VG 15, 5 litre
• ISO-L HV VG 36, 5 litre
1. A valve can be included in the hose system to allow loads to be lowered slowly.
2. A pressure gauge can be installed to read the pressure.
4

Preparation for first use

4.1 General
• Check the equipment for completeness and damage. Do not use the equipment if it is damaged; in
that case contact the Holmatro dealer.
• Check whether all accessories are available.
• Make sure the pump is in a horizontal position.
• Remove the cap from the hydraulic oil tank. This cap is used for transport only.
• Replace the cap with the cap with the dipstick (Fig. 3/6).
26
1
916.219.569_001
Unit
dB(A)
2
m/s
°C
EHW 1650 RC
< 70
< 2.5
-20 to +55
2006/42/EC
The Netherlands
Part number
100.553.116
100.181.130
100.183.340
100.183.341
100.581.105
100.581.036
350.581.152
100.581.128
100.183.340
100.183.341
100.581.051
100.581.055
180.000.815
EHW