Kvm Ports - Belkin OmniView Manual De Instrucciones

Ocultar thumbs Ver también para OmniView:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 323
4-4 KVM Settings
3a. X Resolution
3b. Y Resolution
3c. Horizontal Frequency (Hz)
3d. Vertical Frequency (Hz)
3e. Total horizontal pixels
3f. Polarity
3g. Description

KVM Ports

It is possible to select the number of ports used by the connected KVM
switch, and you may assign each port a name. In order to provide KVM-port
switching through the RIPM, key combinations have to be defined for the ports.
51
P75075ea_F1DE101Hea_man.indb 51
This refers to the visible number of horizontal pixels.
This refers to the visible number of vertical pixels.
This refers to the horizontal (line) frequency in hertz.
This refers to the vertical (refresh) frequency in hertz.
This refers to the total number of pixels per line, including the non-visible
and blanking area.
This refers to the positive or negative characteristic of the synchronization
signals. V indicates vertical polarity; H indicates horizontal polarity.
Here you can provide a mode name, which is displayed in the Remote
Console if custom mode is activated.
Menu Options
8/16/2006 11:33:21 AM

Publicidad

Tabla de contenido
loading

Tabla de contenido