Lens Adjustment; General; Using The Basic Videophone Functions - Extel 720308 Instalación Y Guía Del Usuario

• Management and complete erasure of the images memory and the dry-contact closure duration
• Managing and viewing images
To adjust the luminosity, contrast and colours of the image coming from the intercom panel:
• Go into surveillance mode (when the monitor display is switched off, press the key
• The intercom panel video feed appears on the screen.
• Long press on the mechanical navigation wheel. The settings will appear on the screen.
• You can modify them and navigate from one to the other using the wheel or the touch keys.
• To come out of settings mode, press the 'back' key
b. Lens adjustment
If, when installing the monitor and the intercom panel in their permanent locations, you notice that the camera
lens is not properly aligned, you can adjust this with the adjustment holes on the back of the intercom panel.
Warning you can only gain a few centimetres in height.
c. General
To find out the keys' functions on a given screen, refer to the icons at the bottom of the screen immediately
above the touch keys.
Main touch key functions
1 • Screen off: Viewing the camera from the intercom panel (surveillance mode).
In the menus: Navigation key (left or bottom arrow)
2 • Call in progress: Gate opening (dry contact)
In the menus: Navigation key (right or top arrow)
3 • Screen off AND icon blinking: Access to images recorded during your absence
Screen off AND icon off: - First press: Access to the date and time
In the menus: Confi rmation key (OK)
4 • Call in progress: Answer the call
In surveillance mode: activate sound
5 • Call in progress: Open the electric strike plate
In the menus: Key to return to previous step
d. Using the basic videophone functions
• When someone presses the button on the exterior panel, a sound goes off inside and the monitor turns on for
about 30 seconds. Once you have identified the visitor, press the
Note: One press of the
• When your conversation is finished, wait for the end of the timer (about 60 seconds) or press the
key to turn off the monitor.
• To bring back the video feed: To bring back the video feed for an extra 60 seconds, press the
• Control of an electric strike plate: The strike plate or lock is opened when your press the
• Control of an automated gate: To control an automated gate, press the
EN5
(8. fi g. 3)
- Second press: Access to the menu
key is enough to initiate communication with the intercom panel.
CFI EXTEL CONNECT - V1
)
key to communicate with them.
key.
button.
key.
or