Eureka AS2000 Serie Guia Del Usuario página 6

Easy 4 Step Assembly
To view our "How to Assemble" demo, visit www.eureka.com/airspeed/assembly
STEP
1
Fig. 1
B
A
Fig. 2
B
A
Fig 1: With the back-
bone (B) loosely on
the base (A), rotate the
backbone forward until
the vaccum is locked in
the upright position.
Fig 2: stand as shown
and push down on
backbone (B) valve to
snap into place. Pull up
to ensure the backbone
has locked properly.
Hose and Tool Storage
C
Hose
Retainer
E
Route hose (E)
through hose
retainer on front
of handle (C).
STEP
2
Alternate View
Hose Retainer
B
C
A
B
Align so that the hose
retainer on the handle
(C) is facing the vacuum
front. Lower the handle
(C) onto the backbone
(B). Push down to snap
into place. Pull up to
ensure the handle has
locked properly.
E
Put hose end (E)
into hook at base
of tool clips. Then
push hose into
clips.
STEP
3
Put dust cup (D) into
place on base. Push
cup handle toward
backbone (B) to snap
into place.
G
Slide crevice tool Store dusting
(F) into top of brush (H) on
extension wand back of vacuum.
end (G). Place
into clips on
the side of the
vacuum.
STEP
4
To attach hose con-
nector, align tabs
and lower hose onto
connector. Turn clock-
wise to lock.
H
I
On some models:
Attach turbo
nozzle (I) to clip
on handle (C).