Front Panel; Power Led ; Rear Panel - Alesis NANOVERB 2 Guia De Inicio Rapido

QUICKSTART GUIDE (ENGLISH)
Make sure all items listed in the Box Contents are included.
1.
READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE
2.
PRODUCT.
Place the product in an appropriate location for operation.
3.
Ensure high quality, shielded audio cables are used away from
4.
sources of electromagnetic interference.

FRONT PANEL

2
3
1. POWER LED – Light will illuminate once the unit is powered on
2. INPUT – Controls both the Left (Mono) and Right channel analog input signal level
3. SIGNAL LED – LED will light up if the signal level is too high which may cause distortion. If this occurs, turn
down the Input control knob and/or reduce the output level from your instrument source
4. OUTPUT – Adjusts the analog output signal level
5. MIX – Adjusts the balance between the incoming "dry" signal and the effect-processed signal. When this knob is
turned to the far left, no processed signal will be heard. When the knob is turned to the middle position, an equal
mix of the dry and processed signal will be heard. When the knob is turned to the far right, only the processed
signal will be heard
6. EFFECTS SELECTOR – Select one of the 16 factory presets with this knob
7. PROGRAM – This will switch between different variations of the effect

REAR PANEL

11
8
8. POWER CONNECTOR – Plug the included AC adapter here (9v AC 500mA)
9. INPUT – Connect the ¼" unbalanced inputs to your source, such as Aux Sends on a mixer. For mono sources,
just connect to the Left (Mono) input on the NANOVERB 2
10. OUTPUT – Connect the ¼" unbalanced outputs to an Aux Return on a mixer, powered speakers, or amplifer
input
11. BYPASS – Attach a momentary (non-latching) footswitch to this 1/4" phone jack. When the footswitch is pressed,
the NANOVERB 2 will bypass the effects and only the dry signal will pass through the unit. If the footswitch is
pressed again, effects will continue to output
5 4
10 10
BOX CONTENTS
6
9
3
NANOVERB 2
Power Adapter
Quickstart Guide
Safety Instructions &
Warranty Information
Booklet
7
1
9