Transformer And Dryer Plug-In; Filling Soap Tank And Priming The Soap Spout - Bradley Advocate AV Serie Manual Del Usuario

Sistema de lavabo
Ocultar thumbs Ver también para Advocate AV Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Soap/Faucet, Transformer and Dryer Plug-In
8
120V installation shown, 230V similar.
A
Plug the soap/faucet power adapter into the wall
outlet at this location.
B
Place your hand beneath the faucet to activate.
Purge the air from the supply line. See step 10
for water temperature adjustment.
Plug the dryer motor power cord into the wall
C
outlet at this location (20 amp circuit required
for 120V installation. 10 amp minimum circuit
required for 230V installation).
D
Plug the other end of the dryer motor power cord
into the dryer motor assembly (see page 15).
E
Turn the dryer on/off switch to the
ON position.
Filling the Soap Tank and Priming the Soap Spout
9
(Model AV-Series Soap-1)
See Soap Recommendations section
prior to filling soap dispenser.
Place the soap key into the keyhole
on the soap body base. Push the
A
soap key up and gently rotate back
until soap cover unlatches from the
soap body base. Rotate the soap
cover up.
Soap level indicator light blinks
red when soap level is low.
To ensure optimal soap
dispenser performance,
wipe down soap nozzle
with warm water. This
will help prevent the
buildup of soap.
Bradley • 215-1771 Rev. H; ECN 16-08-027
#10-24
Flat Head
Security
Screw
(optional)
Contact
Bradley
Activate the soap spout by placing your hand
beneath the soap nozzle for 15 seconds. Keep
your hand in place once the soap starts to
C
dispense for up to 30 seconds. After 8 to 12
activations, the pump has been primed and
your hand can be removed from under the
nozzle. The LED light will be blinking green
during the Auto Prime mode.
After the soap system is primed, pour
soap into the soap fill hole to fill the (64-
D
ounce capacity) soap tank. An audible
"chirp" will sound and increase in intensity
when the tank is approaching 95% full.
E
Rotate the spout cover down and
clip the cover into the spout body.
Pour 6-8 ounces of water
B
into the soap fill hole to
prime pump.
5/10/2017
AV30
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Advocate av30

Tabla de contenido