Tilt" Mode; Programming The Days Of The Week - SOMFY Telis 6 Chronis RTS Manual Del Usuario

Telis 6 Chronis RTS
5.4. "Tilt" mode (Function specifically for installers)
If the end-products has tiltable slats (interior or exterior Venetian blinds, roller shutters with tiltable
slats), slat orientation mode can be configured in "EU" or "US" mode on each channel. For the motors
of interior blinds, other than blinds with tiltable slats: blinds, roller shutters, screens, etc. it is
recommended that the "Tilt" mode be configured in "US" mode. By default, all channels are configured
in "US" mode.
"Tilt" mode can only be changed in manual mode.
1) Make sure that the Telis 6 Chronis RTS is
in manual mode (if it is in automatic mode,
briefly press the selection button ( ) to
switch to manual mode).
2) Select the channel you want to configure
using the arrow buttons ( or ).
3) Press and hold the selection button ( )
until "SET" and "MODE" appear on the
screen: "US" or "EU" flashes. To change
mode, press the arrow buttons ( or ).
4) Briefly press the selection button (
save the parameter and exit "Tilt" mode.
- To configure another channel, repeat steps
1 to 5.

5.5. Programming the days of the week

The Telis 6 Chronis RTS can automatically send orders to one or more groups of end-products when
it is in automatic mode, after creating a program. Up to 6 automatic orders can be programmed for
each day of the week.
Each of these automatic orders can be:
• Set for a set time or at twilight
• Applied to 1 to 6 channels (all end-products on the same channel are controlled at the same time)
c, e, a, or
The days of the week can only be programmed in automatic mode.
"Automatic order programming" mode can be deactivated at any time by pressing and holding the
selection button ( ). Only confirmed parameters are saved.
5.5.1. Selecting the day to be programmed
1) Make sure that the Telis 6 Chronis RTS is in automatic
mode (if it is in manual mode, briefly press the selection
button ( ) to switch to automatic mode).
2) Press and hold the selection button (
appears on the screen: "Automatic order programming"
mode is activated, and the day previously displayed
flashes.
3) Select the day you want to program using the arrow
buttons ( or ).
4) Briefly press the selection button (
that is flashing: "EDIT" appears and flashes.
6
2
3
7 s.
) to
4
1
) until "SET"
3
) to program the day
Copyright © 2010 Somfy SAS. All rights reserved.
2
4