Disinfection And Sterilization; Preventive Maintenance; Corrective Maintenance - GNATUS Optilight Color Manual Del Proprietário

CONSERVATION AND CORRECTIVE AND PREVENTIVE
MAINTENANCE
For carrying out the cleaning of your equipment, we recommend the use
of the "BactSpray" (nº Reg. MS: 3.2079.0041.001-5) or other that has
similar characteristics:
Active ingredient: Benzalkonium chloride (Tri-Quaternary Ammonium)
Sol at 50%....................................................0,329%
Product's composition: Butyl Glycol, Decyl Polyglucose, Sodium
Benzoate, Sodium Nitrite, Essence, Propane / Deodorized Butane,
Demineralized water.
Further information on cleaning procedures; see the instruction from the
manufacturer in the product.
NOTE: The registration at the Ministry of Health for "BactSpray" is carried
out separately from the product described here in this manual, because
"BactSpray" is not manufactured by Gnatus.
Note: Use gloves and
other protection systems
during disinfection.

Disinfection and sterilization

- To carry out the disinfection of the equipment, use a clean and soft cloth moistened
with alcohol 70%.
- Never use corrosive disinfectants or solvents.
THIS EQUIPMENT IS NOT SUPPLIED STERIL, IT MUST BE CLEANED AND
STERILIZED BEFORE ITS FIRST USE
Only the light conductor must be sterilized in the following conditions:
- Maximum temperature of 135ºC.
- The light conductor must be packed properly cleaned.
- Do not sterilize the light conductor in contact with other kinds of material.

Preventive Maintenance

The equipment must suffer routinely measurements, following the current legislation
of the country.
But, never with a period superior to 3 years.
For protecting your equipment, look for a Gnatus' technical assistance for periodic reviews
as preventive maintenances.

Corrective Maintenance

Gnatus states that the supplying of the circuits' diagram, Part lists or any other information
that permits the technical assistance by the user, can be requested, since previously agreed
between the buyer and Gnatus.
In case of the equipment presents any abnormality; check if the problem is related
to some of the listed items under the item Unpredictable (situation, cause and
solution). If it's not possible to solve the problem, shutdown the equipment and
call Gnatus' technical assistance.
43