FujiFilm Sonosite S II Stand Manual Del Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
To connect cords to the wiring bracket
Attach the cords to the matching slots in the wiring bracket.
To remove the ultrasound system
WARNING:
1 Support the ultrasound system so that it does not fall when loosened.
2 Turn the screw counterclockwise in each of the four corners of the mounting plate. If necessary, use a
Phillips-head screwdriver.
3 Remove the system from the stand.
The system lifts off the two mounting plate pegs.
6
To avoid the risk of personal injury or damage to the ultrasound system, support
the full weight of the ultrasound system while loosening and removing it from
the stand.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido