Alarm Light - Ezviz T9 Guia De Inicio Rapido

Installing T9
Picking an Installation Place
1
Pick a clean and plat place to install T9.
Installing T9
2
Option 1 (Recommended)
Paste the foam sticker onto the back of T9 and
stick T9 to the installation place, as shown in
the figure below.
Specifications
Power Voltage
Working Current
Working Environment
Working Temprature
Working Humidity
Storage Temperature
Weight
Dimension (H*W*D)
Alarm Volume

Alarm Light

Option 2
- Drill a screw hole in the installation place.
- For the cenment wall, push the expansion
screw into the hole.
- Push the screw into the hole or the
expansion hole.
- Hang the T9 onto the fixed screw.
Wall
DC 5V (Micro USB)
Static: 22mA Maximum: 200mA
Indoor
-10°C to 55°C (14°F to 131°F)
10% to 90%
-20°C to 70°C (-4°F to 158°F)
77g
67 mm*33mm*121mm (2.6"*1.3" *4.8")
85dB (within 3 m)
Red indicators blink when alarm occurs.
4