Channelling Instructions - Arneg BREMA 5 Manual De Instrucciones

Brema5 - Brema LF
English

1. Channelling instructions

To channel the cabinet, keep to the following instructions:
1 Remove the wooden frame used for transport,
unscrewing the feet and removing the
washers.
2 Screw the feet back in again (without the
washers) at a maximum height of 25 mm.
N.B.Raise the front feet thereby tilting the
cabinet at least 10 mm towards the wall.
This will ensure perfect door closure
(pag. 2 Fig. 4 Rif. 6)
3 Empty the cabinet of any packaged parts,
without damaging them.
4 Identify and recover the 'channelling kit' blister
pack' (A).
(A)
32
3 6
3 5 6
3 5 6
3 5 6
2 1
4 7
Rif. Codice Q.tà Descrizione
1 02940652 1 Alignment plug profile D 4
2 02940045 1 Alignment plug profile D 3
3 04711065 5 Screw TCEI M8X120
4 04715048 5 Flathead screw type M5X12
5 04480112 3 Ring D 8,5x24
6 04230600 5 Hexagonal nut M8
7 04231100 5 Blind hexagonal nut type
3 6
25
05060047 03 24/02/2010