Set Check Weighing; Note; Accumulation - MS Schippers MS Animal ID Instrucciones Para El Uso

Press key to confirm, display will show "set l".
Enter the low limit value by using
key to increment the value.
Press key to confirm.
To escape from the settings, press

4.3 Set Check Weighing

Press and key together, display will show "set h".
Press key to select beep.
Press key to confirm, display will show no or ok or ng
Check mode no: No beep sounds in the limits. Function turned off.
Check mode ok: When the weight is within the limits, OK will be shown and beep will sound.
Check mode ng: When the weight is outside the limits, the beep will sound and OK will be shown.

4.4 Note

Note: Check weighing is available only if weight is more than 20 units.
To switch off check weighing, enter 0 for both limits by pressing the
are displayed, press

5. Accumulation

5.1 Note
The scale can be set to accumulate manually by pressing the
p 2 Com » mode » pr 2
Before operation, the scale should be stable and zeroed. Accumulation is available only if weight is
more than 20 units.
and keys to change the active digits and press
key.
to enter these zero values.
key. While the current limits
key. For settings, see the parameter
27