Replacing Parts - VOX Amplification VH-Q1 Manual Usuario

Adjusting the monitoring EQ of the ambient sound
■
Press the SOUND ENHANCING button
on the right side of the unit to adjust the
monitoring EQ of the ambient sound.
• Repeatedly pressing the SOUND ENHANCING
button cycles through the settings in the
following order: Basic for a guitar → Big for a
guitar → Bright for a guitar → Big for a bass
→ Bright for a bass → FLAT.
Adjusting the monitoring volume of the ambient sound
■
Use the ambient sound monitoring
volume controller on the right side of this
unit to adjust the monitoring volume of
the ambient sound.
• (+): Increases volume
(–): Decreases volume
SOUND
ENHANCING
Cleaning
In order to enjoy continued use of this unit for a long time, regularly maintain
the various parts. Do not clean using solvents such as alcohol or thinner.
Cleaning the headphone body
● Wipe the headphone body with a dry cloth.
● If the charging connector or a control button gets wet, wipe it off
immediately. Otherwise, malfunction may result.
● The headphone ear pads easily get dirty, so wipe them frequently to keep
them clean. Leaving bodily or other oily residue on the ear pads will cause
them to deteriorate quickly.
Since the sound-producing parts of this unit are delicate, do not touch or
●
blow on them or expose them to wind. Otherwise, malfunction may result.
If the charging cable becomes dirty, wipe it with a dry cloth. Continuing to
●
use the cable while it is dirty may cause it to deteriorate and malfunction.

Replacing parts

Replacing ear pads
■
If the ear pads are lost or become
unusable due to wear, replace them with
the separately sold accessory.
Pull off the old ear pad while rotating it
toward you for the left (L) side, or away
from you for the right (R) side, and then
attach the new ear pad by inserting the
four tabs as shown and rotating the ear
pad.
En
VH-Q1 SILENT SESSION STUDIO 13