Operation - Atag CM4411 Manual De Instrucciones

USE

Operation

EN 10
When you use the appliance for the fi rst time, you will get satisfying
results after 4-5 cups of coffee.
Preparing coffee (using coffeebeans)
The appliance is preset to make coffee with a normal taste. You can
also choose coffee with an extra-mild, mild, strong or extra-strong
taste. With the "coffee strength" knob you can choose the required
taste.
1. Put one or two cups under the coffee dispenser (fi g. 4 and 5).
Move the dispenser up or down (fi g. 6) to adjust the height of the
dispenser to the height of your cup.
4
2. For a creamier coffee, lower the spouts to bring them as close to the
cups as possible (fi g. 6).
5
6
3. Select the desired cup size with the "cup size" knob. The selected
cup size is displayed. Then press the "1 cup of coffee" button or the
"2 cup of coffee" button to make one or two cups of coffee.
To change the quantity of coffee automatically, follow the
instructions in (see "Changing the quantity of coffee" on page 13).