Messages - Atag CM4411 Manual De Instrucciones

MESSAGES

MESSAGE
FILL TANK!
GROUND TOO FINE ADJUST
MILL + PRESS HOT WATER
KEY
EMPTY WASTE COFFEE
CONTAINER
INSERT WASTE COFFEE
CONTAINER
ADD PRE-GROUND
COFFEE
FILL BEAN CONTAINER
EN 30
MEANING
The water tank is empty or not
properly in place.
The water tank is dirty or
limescale deposits have built up
inside it.
Coffee comes out too slowly.
The coffee machine cannot
make any coffee.
The waste coffee container is
full.
The waste coffee container was
not replaced after cleaning.
No ground coffee was put into
the fi lling chute after selecting
the preground coffee function.
There are no more coffee beans
in the coffee bean container.
If the mill mechanism starts
sounding very loud, this can
mean that a small stone from
the coffee beans has blocked
the mill mechanism.
WHAT TO DO
Fill the water tank and insert it
according to instructions, page
8 (fi g. 1).
Rinse out or descale the water
tank.
Turn the knob for the grind
level setting clockwise by one
position (see "Setting the grind
level" on page 14).
Place a container underneath
the hot water nozzle and press
the "hot water" button
Empty, clean and replace the
waste coffee container as
described on page 12.
Open the service door and
insert the waste coffee
container.
Add ground coffee as
described in (see "Preparing
espresso coffee using ground
coffee" on page 14 and 15).
Fill the coffee bean container,.
Consult customer services.
.