Safety Instructions; Before Use; Charging And Switching On - Hilti PSA 200 Manual De Instrucciones

Product information
Monitor
Generation
Serial no.
2 Safety

2.1 Safety instructions

WARNING! Read the operating instructions stored in memory in the device.
▶ Use the device only if it is in perfect working order.
▶ Never tamper with or modify the device in any way.
▶ Always check how the device is set before using it.
▶ If the device has been exposed to considerable temperature fluctuations, allow it to become acclimatized
to the ambient conditions before use.
▶ Check the display after switching on.
◁ The disclaimer notice displayed when starting the device must be accepted by the user before the
main menu for the current project can be accessed.
▶ The warnings shown in the display must always be observed.
▶ Keep the display clean.
▶ Store and transport the device safely.
◁ The storage temperature range is between -25°C and 63°C.
3 Description
3.1 Product 1
On/off button
@
Windows button
;
Confirmation button
=
Increase brightness
%
Reduce brightness
&
Mute the device
(
Screenshot function
)
3.2 Use
The tablet is designed to be used to display and analyses scans made with Hilti Scan systems. Scans can
be managed in projects and subsequently transferred to a PC for data evaluation and archival.

4 Before use

4.1 Charging and switching on

1. Charge the device fully.
2. Switch the device on by pressing the on/off button.
3. Start the PSA 200 application.
4. Before the PSA 200 application can be used you must accept the terms of the disclaimer notice displayed.
5. Press the X symbol at top right to end the PSA 200 application.
6. To switch the device off select Start → Shut down.
4.2 Activation
1. Type the activation key and your contact data.
Note
When starting the PSA 200 application for the first time you will be required to enter your contact
data and the activation key.
2. Confirm your entries by pressing the Activate function button.
2 English
Printed: 16.11.2016 | Doc-Nr: PUB / 5300608 / 000 / 01
PSA 200
01
+
§
/
:
∙
$
Switch WLAN on/off
Touchscreen
Battery charge state
Power LED
Microphone
Light sensor