KNOWYOURPRESSURE WASHER
_Read
the Operator'sManual and safety rules before operatingyour pressurewasher.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Savethis manual for future reference.
A - Spray Gun-- Controls the application of water onto
cleaning surface with trigger device, includes trigger lock.
B - Spray Tips -- Detergent, 0°, 15° and 40°: for various
high pressure cleaning applications.
C - Accessory Tray -- Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
D - High Pressure Hose -- Connect one end to water pump
and the other end to spray gun.
E - Bottle Brackets -- Cleaningsolution bottles fit in wire
form brackets here. Concentrate bottles not included.
F - Spray tip Extensionwith Quick Connect -- Allows you to
switch between four different spray tips.
G - Choke Lever -- Preparesa cold engine for starting.
H - Air Filter -- Protects engine by filtering dust and debris
out of intake air.
J - Recoil Starter -- Used for starting the engine manually.
I{ - Fuel Valve -- Used to turn fuel supply on and off to
engine.
L - Throttle Lever -- Sets engine in starting mode for recoil
starter and stops a running engine.
_/1- Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
N - Warning/OperatinginstructionsTag -- identifies
hazards and proper procedure to start/stop pressure
washer.
P - Standard DetergentSiphoning Tube/Filter -- Use to
siphon pressure washer safe detergents into the low
pressure stream.
Q - Water Inlet -- Connection for garden hose.
R - High Pressure Outlet -- Connection for high pressure
hose.
S - Automatic Cool Down System -- Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
T - Pump-- Developshigh pressure.
U - Project Pro®PerfectMix
TM
Siphon -- Mixes concentrate
with pressure washer spray.
Items Hot Shown:
Oil Drain -- Drain engine oil here.
Identification Label (near rear of base plate) -- Provides
model and serial number of pressure washer. Pleasehave
these readily available if calling for assistance.
Oil Fill -- Checkand add engine oil here.
Safety Goggles-- Always usethe enclosed safety goggles
when running your pressure washer.