Service, Maintenance And Care - Taski Swingo 2500 Manual Del Usuario

Recovery pump (optional)
• The machine must be switched on.
Emptying at high altitudes:
• Direct the drain hose to a drain or into a bucket.
• Press the button at the drain water pump.
Notice:
It is now emptied to the riser pipe in the re-
covery tank.
Removing and cleaning the brush
Notice:
Clean the brush whenever cleaning work
is completed.
• The machine must be switched off.
• Remove the key and actuate the stopping brake.
• Slightly lift the brush unit.
• Rotate the left tool clockwise and the
right tool counterclockwise, away
from the tool connection.
• Clean the tools under running water.
Cleaning the machine
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in operation)
Notice:
The machine must be switched off and the
key must be removed.
Notice:
Store the machine with a lifted squeegee,
lifted brush and open tank lid. Thus, the
tank can dry,
and the generation of mold and unpleas-
ant odors is prevented.
Attention:
Never store the machine with discharged
batteries. Otherwise, the batteries will be
damaged beyond repair.

Service, maintenance and care

The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
Loading batteries
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
Draining and cleaning the recovery and
fresh water tank (Flextank)
Clean the recycling filter (option)
Check the intake and suction filter for
contaminations and clean them
Clean all yellow marked parts
Clean the brushes
Clean the suction nozzle, check the
blades for wear and change them, if
necessary
Clean the machine with a moist cloth
Clean the probe (recovery tank) and
check functionality
Clean the gasket of the tank cover,
check them for cracks and replace
them, if necessary
Maintenance and service program car-
ried out by Diversey service techni-
cians
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
• In order to maintain operational safety and
readiness for use, the machine must be ser-
viced whenever the maintenance indicator
lights up (factory setting is 650 working
hours) or at least once a year.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
EN
● 62
● 62
● 66
●
●
●
● 67
● 66
● 67
●
●
●
67