mundoclima MVD DC2 Manual De Instalación Y Usuario página 22

Accessories
Verify that the air conditioner includes the following accessories. Please keep the additional accessories properly.
Name
1. Screws, ST3.9x25
2. Plastic expansion tubes
3. Winding belt
4. Water discharge pipe
5. Wall conduit cover
6. Manual
7. Network adapter and wiring group
8. Brass nuts
Accessories to purchase locally
Code Name Appearance
1 Copper pipe
PVC pipe for
2
water discharge
Insulation
3 casing for
piping
Appearance
Dimensions
Choose and purchase copper pipes that correspond to
the length and size calculated for the selected model
in the installation manual of the outdoor unit and your
actual project requirements.
Outer diameter: 37-39 mm, inner diameter: 32 mm
The inner diameter is based on the diameter of the
copper and PVC pipes. The thickness of the pipe
casing is 10 mm or more. Increase the thickness of
the casing (20 mm or thicker) when the temperature
exceeds 30°C or the humidity exceeds RH80%.
20
Qty
Set installation board
8
8
1
1
1
1
In the end-point communication system, the indoor
1
unit needs to connect the P and Q terminals.
1
Pipe connections
Qty
To purchase based
on actual project
requirements.
To purchase based
on actual project
requirements.
To purchase based
on actual project
requirements.
Function
This manual
Note
Use to connect
indoor refrigerant
piping.
Use to discharge
condensed water
from the indoor unit.
Protect piping from
condensation.