Product Description - Shindaiwa 270 Serie Manual Del Propietário

Product Description

Outer Tube
Gearcase
Trimmer Head
Line Cutter
Figure 4
Specifications T270/C270
Engine Model ............................................................... S270 Engine
Dry Weight, T270 ..............................................5.6 kg/12.3 pounds
Dry Weight, C270 ..............................................6.2 kg/13.7 pounds
Type .........................................2-cycle, vertical cylinder, air cooled
Bore x Stroke ................................34 mm x 30 mm/1.3 in. x 1.2 in.
Displacement .........................................................27.2cc/1.7 cu. in.
Maximum Power Output .......................................... 1.1 kW/1.5 hp
Operating RPM Range ................................4500-9000 RPM (min
Transmission Type .......................................Automatic centrifugal
Fuel ..................................................Gasoline-oil mixture, 50:1 with
Specifications are subject to change without notice.
*meets or exceeds these specifications and is recommended for all Shindaiwa
products.
Prior to Assembly
Before assembling this product, please
make sure you have all the components
required for a complete unit:
n Engine assembly (Powerhead).
n Outer tube assembly.
Ignition Switch
Handle
Barrier Bar
Cutting Attachment
Shield
Gearcase
Brushcutter Blade
clutch through bevel gears
Shindaiwa 2-cycle Mixing Oil
n Cutting attachment shield.
n Cutting attachment
n Handle
n Tool kit including: hex wrenches, screw-
driver, combination spark plug wrench.
Carefully inspect all components for damage.
T270 Grass Trimmer
Spark Plug
Cylinder
Cover
Grip
Fuel
Tank
Throttle
Trigger
Hanger
Throttle
Trigger
Cutting Attachment
Shield
Fuel Tank Capacity .........................................670 ml
Carburetion ......................................................TK, Diaphragm type
Ignition ................................ Fully electronic, transistor controlled
Spark Plug ......................... Champion CJ8Y (for EMC compliance
Air Cleaner .................................................................Foam Element
Starting Method ...................................................................... Recoil
)
Stopping Method ...............................Slide switch, grounding type
-1
Handle ..................................... Loop handle w/Barrier Bar (T270)
EPA Emission Compliance Period**..............................Category A
** The EPA emission compliance referred to on the emission compliance label
located on the engine, indicates the number of operating hours for which the
engine has been shown to meet Federal emission requirements. Category C = 50
hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended).
Using the accompanying illustrations as a
guide, familiarize yourself with this unit and
its various components. Understanding your
machine helps ensure top performance, long
service life, and safer operation.
WARNING!
Do not make unauthorized modifica-
tions or alterations to either of these
units or their components.
C270 Brushcutter
Cylinder Cover
Ignition Switch
Hanger
Handlebar
Outer Tube
IMPORTANT!
The terms "left," "left-hand," and "LH":
"right," "right-hand," and "RH"; "front"
and "rear" refer to directions as viewed by
the operator during normal operation of
this product.
Spark Plug
Fuel
Tank
/22.6 ounces
use NGK BMR6A)
Handlebar (C270)
5