Product Description - Shindaiwa AHS2510/EVC Manual Del Propietario - Operador

Product Description

Spark Plug
Throttle
Ignition
interlock
Fuel Tank
Guard
Throttle Trigger
Powerhead Assembly
Using the illustration as a
guide, familiarize yourself
with the Shindaiwa AHS2510
articulated hedge trimmer
and its various components.
Understanding your machine
helps ensure top performance,
longer service life, and safer
operation.
Model
Engine Type
Engine Bore x Stroke
Engine Displacement
Unit Weight, Less Fuel
Unit Dimensions (LxWxH)
Max. Power
Recommended idle speed
Fuel Tank Capacity
Fuel/oil ratio
Carburetor
Ignition
Spark Plug
Electrode Gap
Torque
Air Cleaner
Starting Method
Stopping Method
Blade Length
Clutch Type
Gear Type
Gear Lubrication
Standard Equipment
EPA Emission Compliance Period*
Specifications are subject to change without notice.
Hedge Trimmer Cutter
Air Filter
Assembly
Cutter
Assembly
Adjustment
Lever
Fuel
Handle
Tank
Fuel
Tank
Guard
1670 x 197 x 250 mm / 65,8 x 7,8 x 9,9 in.
50:1 with *ISO-L-EGD or JASO FC class 2-cycle Mixing Oil
Foam pre-filter; main filter: dry element
Automatic, centrifugal clutch with bevel gear
Tool kit w/ spark plug wrench, 4mm hex wrench, 8 x 10 mm spanner, front handle w/guard, tool set, blade scabbard.
* The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operat-
ing hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125
hours (Intermediate) and A = 300 hours (Extended).
** The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC).
Assembly
Outer
Tube
Latch Lock
Latch Gearcase
Release
or any of its components!
AHS2510
4-cycle, vertical cylinder, air cooled
34 x 27 mm/1.34 x 1.06 in.
24.5cc/1.5 cu. in.
6.2 kg/13.6 lbs.
7,500 min -1 (rpm)
3,000 (±300) min -1
590 ml/20 oz..
Walbro WYL, Diaphragm type
Fully electronic, program controlled
NGK CMR5H
0.6 - 0.7 mm/ .024 -.028 in.
100-150 kg cm / 9.8 - 14.7 N∙m
Recoil type
Slide switch, grounding type
590 mm / 20.3 in
Spur gears
Lithium-based grease
Category A
Cutter
Blade
Cover
Hedge Trimmer
Cutter Assembly
Cutter Bar and
Cutter Blades
WARNING!
Do not alter this machine
5