Sanus LF228 Manual Del Usuario página 11

3. Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 3 ½ in. (89 mm).
24
4. Install the four washers
CAUTION:
Improper use could reduce the holding power of the lag bolts
Go to STEP 3 on PAGE 14.
3
25
and lag bolts . Tighten all four lag bolts
3½ in.
(89 mm)
7/32 in.
(5.5 mm)
25 24
only until the washers
25
. DO NOT over-tighten the lag bolts.
4
24
25
22
are pulled firmly against the wall plate
22
.
11