Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
__________________________________________________________________________________________________________
Thank you for purchasing the Ballast Connect. This digitally controlled relay controller can switch 6 x 600W.
Each socket is individually controlled by hybrid relays; during the switching the hybrid relay will switch every 5
seconds. The Ballast Connect has a lot of features due to its digital control.
Warning!
Follow the instructions in this manual carefully before using the Ballast Connect. NEVER plug a lamp into the
Ballast Connect and NEVER remove a lamp's plug from the Ballast Connect when the relays (sockets) are on.
You may only connect or disconnect the plugs of lamps when the relays are switched off by the
"maintenance mode", otherwise the relays may be damaged (see section 5.14).
The relays of the Ballast Connect are not covered by warranty.
Box contents
1. Ballast Connect
2. Mounting kit
3. 2 meters (UTP) cable
4. Spare fuse
5. Manual
(Temp Probe not included)
Features
Suitable for 6 x 600W
•
Silent switching
•
Lamps are switched individually
•
2 digital clocks (24-hour/asymmetric)
•
Adjustable temperature protection
•
In case of overheating, the lamps are switched off one by one (maximum 5)
•
Built-in ammeter
•
Adjustable amperage limit for over-current protection
•
Adjustable switch-on delay
•
All settings are saved in the event of a power failure
•
Display for minimum/maximum temperature
•
Various Temp Probes are available separately (not included)
•
Technical specifications
Power supply: 100 to 240V
•
Mains frequency 50 to 60 Hz
•
Own Consumption: 3W
•
Fuse: 2 x 15A
•
Switching capacity: 3600W / 16A, maximum 24A.
•
Switching capacity per outlet: maximum 4A.
•
Power cord: 3 x 2.5mm
•
____________________________________________________________________________________________________________________________
TechGrow
| Innovative Growing Solutions
Ballast Connect
Digital relay controller
15
Publicidad
Tabla de contenido
