Helo T2 Instrucciones De Instalación Y Manual De Uso página 27

Installation and User's Manual Helo T2
Contents
1. General
1.1 Check the following before taking a sauna bath
1.2 General information on the control panel
2. Circuit diagram
3. Basic schematic of the terminal connections and the installation
4. Installation and use of control panel T2
4.1 Control panel T2
4.2 Control panel functions
5. External switch function
6. Warranty policy
7. RoHS
1. General
1.1 Check the following before taking a sauna bath
1. The sauna room is in an appropriate condition for taking a sauna bath.
2. The sauna room door and the window are closed.
3. The sauna heater is topped with stones that comply with the manufacturer's recommendations; the stones
cover the heating elements; the stones are piled in the sauna heater leaving copious amounts of space in
between.
4. Temperatures approaching 70°C assure a pleasant, smooth sauna bath experience.
1.2 General information on the control panel
Control centre 1601 - 28 (T2) and contactor case 2005 - 14 (WE - 14) can be used with the following sauna
heaters:
- SKLE - ....
- SKLA - ....
The Contactor case should be installed outside the sauna room. The cables should be installed using the
protocols for permanent installation. A split box with a semi-permanent installation into the sauna heater should
be attached inside the sauna room. Caution: not adhering to the minimum distances indicated in the Installation
manual may cause a fire hazard.
To ensure that that it is in an appropriate condition for bathing, always check the sauna room before switching
on the sauna heater.
1105 - ....
1112 - ....
2
2
2
3
4
5
6
7
10
11
12
2