Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Assembling and Mounting the Fan Blades
Assembling and Mounting the Fan Blades (Continued)
5.
A
s s
e
m
b
e l
h t
e
H
o
u
s
n i
assembled Adapter with three screws. (Figure 19)
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box (Figure 20).
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
NOTE: Receiver in controllers system features an
automatic learning function. There are no frequency
switches on the receiver unit. The receiver will
automatically scan the frequency from the hand held
control if an changes are made. the frequency settings
should be changed only in the case of interference or
if multiple ceiling fans with the same type of control
system are installed in the same structure.
2. To make fan operational, install 23A/12V battery
(included) in hand-held remote transmitter, with fan
power off. Then follow the remote code setting process.
(If not used for long periods of time, remove battery to
prevent damage to transmitter). Store the remote away
from excessive heat or humidly (Figure 21).
3. Remote Control Setting and Speed (RPM)
Setting Process : (Figure 22)
1. After installing the unit and restoring power to
your fan, press and hold the "SET" button 1~5
seconds. You must press the "SET" button
within 60 seconds of restoring power to the fan.
2.The fan will start to run and begin the control
setting process. The fan will run in both
directions for a total of approximately 5 minutes.
3. When the fan stops after approximately 5
minutes the control and speed setting process
is complete.
The fan is now ready for normal use.
NOTE: If you want to change the blades: turn
g
S
w
c t i
h
C
u
p
o
n
o t
h t
e
How to Operate Your Ceiling Fan
WARNING
13
Figure 19
MAIN FUSE BOX
Figure 20
Figure 21
Figure 22
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
