Operation; Level Operating Scheme Of The Standard Levels - Siemens WFx6 Serie Manual De Operación Y Instalacion

Operation

Open the fast readout display loop
The display is always off as standard (sleep mode).
Press the <H> key
Current value
Display test -
everything on
0.5 sec.
Display test -
everything off
Due date
Due date value
5 sec. pulsating

Level operating scheme of the standard levels

Press the <H> key or
Siemens Building Technologies
or
5 sec.
0.5 sec
5 sec.
To change the level:
the <V> key
The fast readout display starts
with the current consumption
value.
After 10 repetitions, the display
automatically changes back to
sleep mode.
You can change to the level op-
erating scheme at any time. To
do so, press the < H > or < V >
key for longer than 3 seconds.
the < V > key for longer than 3 seconds.
Press the
< H > key
A6V10816676_----_d 105 EN