Switch On; Aiming The Laser Lines - SKF TKSA 20 Manual De Instrucciones

b) Connect the measuring units to the display unit. Make sure that the marking on the
cables corresponds to the marking of the ports in the display unit (fig. 9).
Fig. 9. Connection of the measuring units

3.4 Switch on

Switch on the display unit by pressing the ON/OFF button. You will now be
prompted to enter the machine dimensions as per chapter 3.6. If no button is
pressed within 60 minutes, the unit will turn off automatically.

3.5 Aiming the laser lines

a) Put the two measuring units in the 12 o'clock position with the help of the spirit levels
(fig. 10).
Fig. 10. The 12 o'clock position
12 SKF TKSA 20