Hisense RW54N1SSD Manual De Operación página 12

" Turn The Interior Light ON/OFF
⑫."
Turns the interior light ON or OFF .If this button is used ,the light is no longer controlled by
the door switch, and remains ON. (Light button deactivated when
is on.)
Setting the temperature
When pressing the
lower compartment automatically. The LED will flash and display the setting temperature.
When pressing the button once, the temperature will increase or decrease by 1°F(or 1°C). If
you try to go beyond the minimum/maximum temperature, the display will jump to the
lowest/ highest adjustable temperature value automatically. When the temperature setting
reaches the temperature you want, leave it for 5 seconds, the LED will stop flashing after 5
seconds, then the temperature has been set successfully.
RW54N1SSD
①. " " Turn Wine Cellar ON/OFF
To turn this unit ON and OFF, press and hold this button for approximately 3 seconds.
" Energy Saver
②."
Energy saver
button:Pressing this button for 3 seconds will turn the energy
saver mode either ON or OFF. When the energy saver mode is ON , the LED light and display
will be turned off, the °F / °C light will be on.
" Compressor Indicator Light
③."
Indicates that compressor is operating.
④." °F / °C " Indicator Light
Will change as the " °F/ °C " button is pressed.
" Set temperature higher
⑤."
Each pression will increase temperature 1
" Set temperature lower
⑥."
Each pression will lower temperature 1
⑦." °F / °C " Indicator Light
Pressing this button switches the indicator light between °C and °F.
" Turn The Interior Light ON/OFF
⑧．"
Turns the interior light ON or OFF. If this button is used ,the light is no longer controlled by
the reed switch, and remains ON. (Light button deactivated when
is on.)
⑨.LED Temperature Display
Display screen shows the temperature setting.
or button, the system will enter the set-up mode in the upper or
°F (or 1 °C).
°F (or 1 °C).
Hisense Wine Cooler
12
energy saver button
energy saver button