Installation Clearance Requirements - Hisense RW54N1SSD Manual De Operación

6

Installation Clearance Requirements

-
When installing the wine cooler under a counter,follow the recommended spacing
dimensions shown.
•To ensure proper service access and ventilation, allow at least 1/2" clearance at the back,
1/4"at top and 1/4" at sides. The installation should allow the unit to be pulled forward for
servicing, if necessary.
Top View Side View
1/2
1/4
1/4
1/4
•The wine cooler should be installed on a firm and level surface that will be able to support
the entire weight of a fully loaded unit. It is important for the wine cooler to be level in order
to work properly.If needed, you can adjust the height of the wine cooler by rotating the feet.
See the "Leveling the Wine cooler" section.
NOTE:
This unit is front breathing.
Do not block the front air vent. Blockage of the vent will result in high operating temperatures
and system failure.
Hisense Wine Cooler