Hisense RW54N1SSD Manual De Operación página 14

RW54N1SSD
To prevent damaging the door or gasket , make sure to open the door enough to clear the racks when
pulling them out.
To handle the bottles, it is necessary to extend the rack at least 1/3. The sides of the racks are
equipped with protective stoppers which prevent bottles from falling from the shelves.
When removing / inserting the shelves from / into the rails, lift one side of the shelf as shown in the
picture below and pull the shelf out towards you, or push it in when inserting it, until one side is
securely seated on the rail.
There are two glass shelves which are specifically designed for your beverage storage need.
Note:
These glass shelves need to be placed and secured on the top of wooden shelves before storing
the beverage on top it.
Storage diagram
(for 750ml bottles and 350ml cans)
RW46N1DSD
Total:46 bottles(Max)
Note:
Take out the glass sheets from the shelves and put the wine bottles as the graph,you can
put 54 bottles.(For Type1 of RW54N1SSD model)
According to the graph,take out two wooden shelves and place two glass sheets on the
relevant wooden shelves,you can put 96 beverage cans; you can put 22 wine bottles in
other wooden shelves.(For Type2 of RW54N1SSD model)
Type1
Total:54 bottles(Max)
8
+
8
+
8
+
8
+
8
+
6
46
Hisense Wine Cooler
RW54N1SSD
Type2
Total:96 cans and 22bottles(Max)
8
+
48
8
+
8
+ 48
8
+
8
96
+
8
+
6
54
14
8
+
8
+
6
22