Leveling The Wine Cooler; Important - Hisense RW54N1SSD Manual De Operación

9

Leveling The Wine Cooler

5
5.Pull out the door axis and put it into the hole of the other
side of the door.The door revolves 180 degrees.Carefully
insert the door into the upper left hinge,slide the door to
the lower left hinge,then adjust and align the position of
the door axis and lower hinge.Secure the door by insta-
Lling the lower screws.
It is important for the wine cooler to be leveled in order to
work properly. It can be raised or lowered by rotating the
plastic sheaths around each of the feet on the bottom of
the machine. If you find that the surface is not level, rotate
the feet until the wine cooler becomes level. You may
need to make several adjustments to level it.
We recommend using a carpenter's level to check the
Machine.
1.Place a carpenter's level on top of the product to see if
The wine cooler is level from front to back and side to
Side.
2.Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the
wine cooler.
Turn the leveling feet to the left to raise that side of the
wine cooler.
IMPORTANT:Once you are ready to install it in a cabinet
or directly on the floor,you must adjust the feet to level
the wine cooler.
Hisense Wine Cooler