Risk Of Damage - Ambiano MX2016 Manual Del Usuario

− Do not transport the mini food chopper while it is operating.
− Make sure that your hands, hair, clothing, jewelry or other
objects do not end up in the mini food chopper or the bowl
while chopping.
NOTICE!

Risk of damage!

Improper set up of the mini food chopper could cause damage.
− Place the mini food chopper on a level, dry and non-slip
work area.
− Do not place the mini food chopper on the edge of the
work surface.
− Never place the mini food chopper on or near hot surfaces
(e.g. hotplates, heating pipes etc.).
The mini food chopper has a safety device.
It only works if the motor block is properly seated on the lid of
the bowl.
Follow the steps below to assemble the mini food chopper:
1. Place the base
2. Place the bowl
3. Fit the blade insert
4
4. Place the lid
At the same time, the blade insert or the frothing insert must be run through the
middle of the opening in the lid.
When putting the lid on, make sure that the handles
6
handles of the bowl are lined up above one another and the "catches" of the
bowl are inserted in the recesses in the lid. The lid is now securely fitted on the
bowl and cannot be turned.
5. Place the motor block
Make sure that the gear shaft
the blade insert or the frothing insert (see fig. A, B, C).
6. When fitting the motor block, run the pins
bottom of the motor block. For this, gently turn the motor block back and forth.
The motor block will audibly lock into place. Check whether the motor block is
securely seated.
The mini food chopper only works if all parts have been properly assembled.
AFTER SALES SUPPORT
1-800-886-8506
USA
8
on a level, dry and non-slip work surface (see fig. A, C).
7
on the base.
10
or the frothing insert
on the bowl.
2
on the lid.
13
5
on the bolt
of the motor block is placed on the opening of
11
of the lid into the holes
9
in the bowl.
3
of the lid and the
12
hup-service@h-u-p.com
USA
First use
on the
13